Tiling Works
Floor and wall tiling across Kuala Lumpur and Selangor, covering substrate inspection, levelling, waterproofing coordination, cutting, laying, grouting and hollow-tile checks at handover.
Tiling fails at the substrate, not at the tile. Before laying we check whether the existing floor is level, whether the old tile or screed needs removal, whether any existing tile is hollow, and whether the area is wet enough to need waterproofing underneath. Tiling over hollow tile transfers the problem to the new layer, and it usually shows up as loose or cracked tiles within a year.
Sequence
Hacking out old tiles and screed where required, clearing and levelling the base, then setting out the layout from a datum line so that cuts fall in the least visible positions. Adhesive is selected for the tile size — large-format tiles need a flatter substrate and a different adhesive than standard sizes. Expansion joints are kept at the perimeter, and after laying we tap-check for hollow spots and record any tile that needs replacement.
Tile selection
Size, finish and slip resistance matter more than pattern. Large-format tiles look calm but need a flatter floor and cost more to lay; small tiles handle slope changes in wet areas better. In bathrooms and balconies, slip resistance should be confirmed before aesthetics. Confirm the batch and shade when ordering, and keep spare pieces — the same shade will not be available in two years.
Quotation
The quotation separates removal, levelling, waterproofing where applicable, laying, grouting and any cutting around fixtures. Tile supply can be yours or arranged by us, and the two are priced separately. If a substrate problem is only discovered after removal, the additional work is agreed before it proceeds rather than billed afterwards.
Handover
Check for hollow tiles by tapping, look along the joints under raking light, and test drainage in wet areas by running water. Grout needs sealing in wet areas and re-sealing periodically. Keep two or three spare tiles; matching a discontinued shade later is difficult.
Suitable For
- Owners replacing worn or hollow floor tiles
- Renovations where the wet area needs re-waterproofing
- Shops and offices that need a durable floor before opening
- Owners changing from carpet or vinyl to tile
What We Offer
- Substrate level and hollow-tile inspection
- Removal of existing tiles and screed
- Floor levelling and surface preparation
- Waterproofing coordination in wet areas
- Tile layout setting and cutting
- Laying with size-appropriate adhesive
- Grouting, cleaning and hollow-tile check
Common Renovation Needs
- Living and dining floor tiling
- Bathroom and kitchen wall and floor tiling
- Balcony and outdoor area tiling
- Shoplot and office floor tiling
- Replacement of hollow or cracked tiles
Site and Substrate Check
Check level, existing tile condition, hollow spots and whether the area needs waterproofing.
Removal
Hack out old tiles and screed where required, then clear and level the base.
Layout Setting
Set out from a datum so cuts fall in the least visible positions and joints stay consistent.
Laying
Apply the correct adhesive for the tile size, lay, level and keep expansion joints at the perimeter.
Grouting and Inspection
Grout, clean, then tap-check for hollow tiles and record any replacement needed.
Frequently Asked Questions
Can you tile over existing tiles?
Only where the existing tile is solid, level and the added height does not affect doors or thresholds. Hollow or drummy tiles are removed first, because tiling over them transfers the problem to the new layer.
Do I need waterproofing before tiling?
Wet areas such as bathrooms, kitchens and balconies normally do. We check the area and confirm whether waterproofing is part of the scope before quoting.
Can I supply my own tiles?
Yes. Confirm the size, batch and shade before the order, and allow spare pieces for cuts and future repairs.