Furniture & interior surface repair
From wooden furniture to tiles and countertops. Assess the material and damage, then explore a local repair.
Find a similar defect and explore the approach. Repair suitability depends on the material and actual condition.
Repair scope
Chipped cabinet edge
Local veneer or edge-band damage
Assess filling, colour and grain matching.
Check the finish type and substrate first. Swelling or extensive delamination needs a separate review.
Scratched wooden tabletop
Light scratches and local finish wear
Assess colour and local sheen matching.
Check scratch depth and the existing coating. Deep cracks and deformation are not treated as light surface wear.
Small tile surface chip
Local chipped glaze or missing edge
Assess filling, colour and surface finishing.
Check that tiles are stable, without movement or recurring cracks. Surface repair does not replace waterproofing or substrate work.
Chipped countertop edge
Small chips in stone or engineered stone
Assess filling, colour and edge finishing.
Check the material, cracks and support. Through-cracks or a loose slab need the underlying cause and structure assessed first.
All 8 repair categories
Timber doors & frames
Paint chips, damaged corners, scratches and small dents
Knocked door corners, chipped frames, pet scratches or small holes in ordinary finishes.
Discuss filling, local colour matching and grain work based on the material and damage depth.
Warping, decay and hardware faults need separate attention. Check the function of fire and security doors first.
Wooden furniture
Scratched tops, chipped edges and worn finishes
Scratches, chips, water marks or heat marks on dining tables, coffee tables and bedside furniture.
Assess scratch treatment, filling, colour matching and local finish work.
Check whether water or heat marks reach the timber. Loose joints, pests and recurring splits need their cause assessed.
Cabinets & built-ins
Scratched doors, damaged edging and veneer repairs
Chipped paint, damaged panels, lifting edging, local veneer separation or unwanted fixing holes.
Discuss paint touch-ups, edging repair or replacement and veneer work; consider panel replacement where needed.
Swollen, crumbling or widely delaminated panels cannot be resolved with paint alone.
Tiles
Chipped corners, small pits and old fixing holes
Impact pits, chipped external corners, holes after removing fittings or fine cracks that need checking.
Assess local filling and colour matching, or discuss individual tile replacement where repair is unsuitable.
Check hollow or loose tiles, recurring cracks and leaks first. Surface filling does not repair a waterproofing system.
Stone & worktops
Chipped edges, damaged thresholds and joint finishing
Local chips and joint issues on kitchen worktops, vanity tops, window sills and thresholds.
Discuss filling, colour matching and joint finishing. Grinding or polishing depends on the material.
Natural stone, quartz, sintered stone and solid surfaces require different methods. Through-cracks, movement and support issues need separate assessment.
Flooring & timber finishes
Surface scratches, skirting and painted handrails
Furniture-drag scratches, chipped floor edges and worn finishes on timber steps or handrails.
Assess local colour work, filling, paint touch-ups or individual piece replacement.
Solid timber, engineered wood, laminate and SPC/PVC cannot all be sanded. Loose steps or railings need a safety assessment first.
Metal & window frames
Scratches and paint chips on suitable coated surfaces
Scratched frames or decorative trims, impact damage to coatings and worn metal furniture legs.
Confirm the finish before discussing local colour matching, touch-ups or recoating.
Brushed, plated and mirror finishes need individual assessment. Severe corrosion, structural and sealing issues require separate work.
Bathroom fixtures
Small chips and scratches on suitable ceramic or acrylic surfaces
Small basin-edge chips, bath scratches or local surface wear on shower trays.
Check the base material, coating and location before assessing local filling, colour and finish work.
Through-cracks, ongoing leaks, load-related cracking and support issues are outside ordinary surface repair.
Repair suitability
Surface defects and underlying issues need different approaches.
Minor surface damage
Scratches, worn finishes and small chips.
Start with photos
Material, depth, grain and sheen help determine the possible improvement.
Other issues present
Swelling, movement, leaks or recurring cracks.
Check the cause first
Confirm and address the cause before discussing the surface finish.
Safety or support
Load-bearing, fire, security or support functions.
Specialist assessment
Appearance alone cannot establish functional safety; an appropriate specialist assessment is needed.
Repair process
Review photos and site conditions, then agree the scope and next steps.
Send photos
Overview, close-up, dimensions and your area.
Review scope
Check the material and damage; visit if needed.
Quote & arrange
Agree the scope, expected result and timing.
Check & care
Review the work and ready-to-use time.
Home upkeep · Moving damage · Rental maintenance · Shop or renovation handover touch-ups
Pricing factors
Material & damage
Finish type, damage depth and repair area.
Colour & quantity
Colour and grain matching, number and spread of defects.
Site & access
Location, access conditions and protection needed.
Common questions
Will the repair be completely invisible?
That cannot be guaranteed. Colour, grain, sheen and damage depth affect the result. We review photos and materials before discussing what is achievable.
Can I ask about just one damaged corner?
Yes. Send photos, approximate dimensions and your area. Suitability and cost depend on the material, quantity and access arrangements.
What if I don’t know the material?
Start with an overview, close-up and side view. A product name, purchase information or spare sample can also help.
Is filling a crack enough?
The cause and stability need checking first. Movement, recurring cracks, leaks or support issues cannot be resolved with surface filling alone.
Can every surface be sanded?
No. Solid timber, veneers, laminate, sintered stone, coatings and plating have different limits. Material and surface thickness must be checked.
Does this include upholstery, plumbing, electrical work, appliances or locks?
This page covers local repairs to furniture and interior finishes. Those services are outside this page’s scope.
Photo enquiry
Share an overview, close-up and dimensions, along with your area. Keep unrelated faces, documents and private information out of the photos.
An overview
Show the item and damage location.
A close-up
Focus on the defect in natural colour.
Side & size
Show depth and approximate dimensions.
Related services
For a wider scope of work, explore the services below.
Custom built-ins · Flooring services · Old house renovation