Partition Works
Partition walls and dividers across Kuala Lumpur and Selangor, in plasterboard, glass and aluminium, with acoustic performance, fire requirements and concealed services considered before the frame is fixed.
A partition decides sound, privacy and services, not just the wall line. Before fixing the frame we confirm what the room is for — a meeting room, a bedroom, a consultation room or a store — because that determines whether a single plasterboard layer is enough or whether insulation and a second layer are needed. Opening a finished partition to add a cable is expensive, so every concealed route is planned first.
Sequence
The partition line and door position are marked, concealed wiring and any plumbing are routed and photographed, then the frame goes up with stud spacing suited to the wall height. Insulation is added where agreed, boards are fixed, taped and jointed, and the surface is skimmed before painting. Doors, access panels and anything wall-mounted are located at this stage, because heavy items need backing or extra framing that is much easier to add before boarding.
Construction choice
Plasterboard gives privacy and takes paint well; glass gives light and sightlines but different acoustic and privacy behaviour, and needs framing that can carry the weight. Aluminium and glass partitions work well for offices that want openness with a defined boundary. Acoustic performance depends on the whole build-up — board layers, insulation, perimeter sealing and how the door closes — not on one product.
Quotation and approval
The quotation separates framing, boarding, insulation, finishing, and any glass or aluminium system. Where the building requires fire-rated construction, the specification changes and the requirement has to be confirmed with management before work starts rather than assumed. Partitions on or near structural elements usually need approval in condo and office units.
Handover
Close the door and listen from the other side — that is the honest acoustic test. Check the wall under raking light for flatness, confirm access panels open, and make sure every switch and socket on the partition actually works. Hairline cracks at board joints can appear as the building settles and are normally filled at the next touch-up.
Suitable For
- Offices adding meeting rooms or private cabins
- Owners splitting a large room into two usable spaces
- Clinics and studios that need acoustic separation
- Shops that need a stockroom or staff area
What We Offer
- Partition layout and door position setting
- Metal stud framing
- Insulation where specified
- Single or double layer plasterboard
- Tape, joint and skim finish
- Glass or aluminium partition options
- Concealed wiring and plumbing coordination
Common Renovation Needs
- Office meeting room partition
- Bedroom or study partition in a condo
- Glass partition for a reception area
- Stockroom partition in a shoplot
- Partition with a concealed sliding door
Purpose and Requirement Check
Confirm the room use, acoustic need and any fire requirement from the building.
Layout and Service Routing
Mark the partition line, door position and route any concealed wiring or plumbing.
Framing
Install the frame with the correct stud spacing and fixing for the wall type.
Boarding and Insulation
Add insulation where agreed, then board, tape and joint.
Finishing and Handover
Skim, sand, paint or fix glass, then check doors, panels and acoustic result.
Frequently Asked Questions
How much sound will it block?
It depends on the construction — a single board layer, insulation and a double layer all behave differently. Tell us what the room is used for and we will propose a build-up rather than quote a wall type blindly.
Can I hang things on the partition?
Yes, if the fixing points are planned before boarding. Heavy items need backing or additional framing, which is much easier to add before the boards go on.
Do I need approval for a partition?
For condo and office units, check with the management office first — partitions on or near structural elements and any fire-rated requirement usually need approval.